GB1094.6-2011 Current Limiting Reactors 11KV 363A Dry Iron Core Reactor

11KV 363A Dry Iron Core Reactor,Current Limiting Reactors

1. Overview of 11KV 363A Dry Iron Core Reactor,Current Limiting Reactors

The iron core reactor is mainly composed of an iron core and a winding. The winding is sleeved outside the iron core column, and the winding is usually made of insulated copper wire. The magnetic flux path of this kind of reactor is the iron yoke and the iron core column with gaps. Since the permeability of the magnetic material is much larger than that of air, the iron core reactor of the same capacity is smaller than the air core reactor.

 2. Purpose of 11KV 363A Dry Iron Core Reactor,Current Limiting Reactors

It is used in the high voltage parallel circuit of 35kV and below power system and high-speed rail power supply system. It transmits inductive reactive power through the main variable direction system to compensate the capacitive current of the transmission line, prevent the voltage of the light load line from rising, and maintain the voltage stability of the transmission system. Sex, improve power factor of power system and save energy.

3. Main features of 11KV 363A Dry Iron Core Reactor,Current Limiting Reactors

• Running shall be periodically inspected to monitor running temper ature and noise of reactors.
• The porcelain housing of reactors shall be periodically inspected to observe whether there is any oil stain, damage, crackle and discharging trace and whether coil has any damage and crackle.
• The dirt accumulated in the porcelain housing and reactor shall be periodically cleaned out to prevent it from affecting the insulating property.
• Periodical inspection shall be conducted for tightness of reactor's connection row to see whether there is any overheating phenomenon.

​

4.Executive standard of Dry Iron Core Reactor

GB1094.6-2011,JB/T5346,JB/T10775

5. Conditions of use

Location:indoor or outdoor >> Environment temperature:(- 40℃~ + 45℃) >> Altitude above sea level: 1000 meters(a statement is required if operating above 1000 meters) >> The location should have no harmful gas or vapor or electric and Explosive dust