33kV 1515A TCR Thyristor Controlled Reactor JB/T5346 Standard

33kV 1515A TCR Reactor,Current Limiting Reactors

1. Overview of 33kV 1515A TCR Reactor,Current Limiting Reactors

Compared with traditional oil immersion iron core reactor,dry-type air core reactors have advantages of light weight,good linearity,stable reactance,small loss ,low noise ,etc.The epoxy is adopted for envelopment,with high mechanical strength and super-high short-time current resistance ability .It is simple in structure and compact without oil.The star bracket and lead wire are welded by adopting the argon arc welding to greatly improve reliabiility of operation;Coverd with ultraviolet resistant paint on surface,it can be used for indoor and outdoor longtime running.Whereas the above-mentioned reason,dry-type air core reactors gradually supersede traditional oil immersion iron core reactors.

2. Main features of 33kV 1515A TCR Reactor,Current Limiting Reactors

• The reactor is enclosed by epoxy resin impregnated long glass fiber.The reactor is composed of several enclosures of coils.
• The coil is insulated by polyester film ,which has good capability of insulation.
• The reactor is painted with resisit aging ,ultraviolet-proof insulation coatings,and has fine performance operating outdoors.
• Between enclosure of coils,supports made of polyester glass fiber are used for axial heat radiator, this construction has abetter property of heat radiation.
• Dry-type semi-iron core reactor puts the iron core column in the hollow core of the hollow reactor, without enclosing the entire coil, and the iron core consumption is small;
• The core column is made of high-quality low-loss imported cold-rolled silicon steel sheet, which has high magnetic permeability, small coil diameter, low loss and low energy consumption;
• The core column adopts integral vacuum epoxy casting molding, which is dense and strong as a whole, with high mechanical strength and low noise. The reactor can be directly used outdoors after being treated with special protective measures, without being restricted by any environmental conditions;

​

3. Executive standard of 33kV 1515A TCR Reactor,Current Limiting Reactors

GB1094.6-2011,JB/T5346,JB/T10775

5. Conditions of use

(1) Use location: indoor or outdoor
(2) Operating environment temperature: -40℃～+45℃
(3) Altitude above sea level: 1000 meters(a statement is required if operating above 1000 meters)
(4) The installation site has no gas, vapor, chemical deposits, dust, dirt and other explosive and corrosive media that seriously affect the insulation.