31.1mh 33kV 262A Dry Type Reactor

33kV 262A Dry-Type Air Core Reactor,Current Limiting Reactors

1.Overview of 33kV 262A Dry-Type Air Core Reactor,Current Limiting Reactors

The Dry Tpe Air Core Series Reactors made By the us have got The multilayer winding shunt structure.every layer windingis
Shunt winded by the small bore aluminum lead and every layer’s leading-out are jointed on the two layer aluminum ally bus-bars.the whole reactor is enveloped by high temp solidified exopy fiberglass with the method of natural air cooling. The product is coated with the anti-aging,anti-UV,antifouling and hydrophobic dope. This type reactor has got the advantages of low-loss,high security.low-noise and convenient installation and maintenance. The product’s operation life reaches a length of thirty years.

2. Main features of 33kV 262A Dry-Type Air Core Reactor,Current Limiting Reactors

• The reactor is enclosed by epoxy resin impregnated long glass fiber.The reactor is composed of several enclosures of coils.
• The coil is insulated by polyester film ,which has good capability of insulation.
• The reactor is painted with resisit aging ,ultraviolet-proof insulation coatings,and has fine performance operating outdoors.
• In the shunt compensation capacitor device,it is used in series with the shunt capacitor bank to suppress harmonic amplification,reduce system voltage distortion, and limit the closing inrush current when the capacitor bank is switched.

3.Executive standard of 33kV 262A Dry-Type Air Core Reactor,Current Limiting Reactors

GB1094.6-2011,JB/T5346,JB/T10775

5. Conditions of use

• The altitude does not exceed 2000m.
• Ambient temperature -25~+45°C, relative humidity not exceeding 90%.
• The waveform of the supply voltage is similar to a sine wave.
• There are no harmful gases around, no flammable or explosive materials.
• The surrounding environment should have good ventilation conditions. If it is installed in the cabinet, ventilation equipment should be installed.

Service Gurantee

1. To provide all technical information and drawings as per contract promptly. We can obliged to invite client, if necessary, to attend technical design review.

2. To carry out spot technical service as per client’s schedule, offer guideness for installation and commissioning according to technical information and drawings.

3. For relevant auxiliary equipment procured by customers, We will provide relate technical information to meet requirement of equipment interface.

4. To execute stipulations in MOU or agreement signed by seller and buyer strictly.

5. To train staff from client for equipment installation, commissioning, application, maintenance as stipulated in the contract.

6. To reinforce pre-sales, mid-sales, after-sales service, to carry out “24-hour service”, “service in advance”, “overall process service”, “lifelong service” in our manufacturing, installation, commissioning and maintance.

7. To meet spare parts’ requirement by customers at anytime.