|Rated Thermal Stability Current:
||Rated Dynamic Stability Current:
IP23 High Voltage Switchgear,
10KV High Voltage Switchgear,
Movable Prefabricated Substation
ZBW Series Movable Prefabricated Substation,High Voltage Switchgear
1. Overview of ZBW Series Movable Prefabricated Substation,High Voltage Switchgear
The SYZBW series of portable prefabricated substations combine high-voltage electrical equipment, transformers, and low-voltage electrical equipment into a compact complete set of power distribution devices. This type of box-type substation has the functions of an ordinary box-type substation and is mobile. Function.
2. Purpose of ZBW Series Movable Prefabricated Substation,High Voltage Switchgear
SYZBW is suitable for power systems with a rated voltage of 12KV. It is widely used in coal mines, copper mines and other mines and places where electrical equipment such as road construction needs to be moved frequently to meet the requirements of electrical equipment, and used for receiving and distributing electrical energy in the power distribution system.
3. Main features of ZBW Series Movable Prefabricated Substation,High Voltage Switchgear
- The product shell material adopts aluminum alloy plate, stainless steel plate, composite plate, glass fiber, reinforced cement board, etc.;
- The substation base is made of galvanized channel steel or cement, with strong corrosion resistance and sufficient mechanical strength;
- The top cover of the box adopts a double-layer structure, which has good heat insulation, radiation protection and ventilation effects;
- Each room of the substation is separated by iron plates to form an independent small room, and each room is equipped with lighting facilities. The top of the transformer room is equipped with an automatic exhaust device to adjust the temperature of the transformer room;
- The color of the box body of the box change is flexible and can be coordinated with the surrounding environment.
4.Technical Data of ZBW Series Movable Prefabricated Substation,High Voltage Switchgear
|Rated thermal stability current
|Rated dynamic stability current
|Rated closing short-circuit current
|Rated breaking short-circuit current
|Rated breaking load current
|1min power frequency withstand voltage
|Lightning impulse withstand voltage
|Shell protection grade
||oil change ≤55dB, dry change ≤65dB
|Number of circuits
||with the project
|The maximum reactive power compensation amount on the low-voltage side
5. Conditions of use:
- Altitude ≤1000m
- Wind speed ≤34m/s (not more than 700Pa)
- Ambient temperature: highest temperature +40℃, lowest temperature -35℃;
- Relative humidity: daily average value is not more than 95%, monthly average value is not more than 95%
- Anti-vibration: horizontal acceleration is not more than 0.4m/s2, vertical acceleration is 0.15m/s2
- The inclination of the installation site: not more than 3°
- Install in a place where there is no fire, explosion hazard, serious pollution, chemical corrosion and severe vibration.
If the above conditions are exceeded, you can negotiate with the company.
6. Ordering instructions of ZBW Series Movable Prefabricated Substation,High Voltage Switchgear
- Box-type substation model, capacity, plan, selection of main components, special requirements and delivery period.
- Box-type substation shell materials (stainless steel plate, aluminum alloy plate, thin steel plate, special cement board) and the choice of shape and color.
- Box-type substation inlet and outlet cable specifications, methods and number of circuits.
- The power intelligent management network or property management requires the network access configuration of the box-type substation.