||Loss Tangent Value (tanδ):
||Internal Fuse Or No Fuse
||Export Wooden Packing
334kvar 11kv capacitor bank,
11kv capacitor bank
High Voltage 11kv Capacitor Bank Shunt 334kVar Capacitor
1.Overview of High Voltage 11KV Capacitor Bank Shunt 334kVar Capacitor
- Capacitor made of pack, stainless steel case and and outgoing porcelain bushing. Two sides of case have two lifting brackets, one of lifting bracket is assembled with earthing bolt.
- Capacitor pack has several elements and insulated parts. It uses Polypropylene film as dielectric and Al foil as polar plate.
- In order to work in different voltage rating, the elements in pack are connected in series and parallel. As required, the discharging resistance can be built-in.
2. Function of High Voltage 11KV Capacitor Bank Shunt 334kVar Capacitor
High voltage shunt capacitor/High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.
||Internal fuse or no fuse
|Number of phases
||Export wooden packing
|Loss tangent value (tanδ)
|Environmental temperature category
|Contamination level of casing
||The capacitor is equipped with a discharging resistor. After being disconnected from the grid, the voltage on the terminal can drop below 75V within 10 minutes
||No severely corrosive gas and steam to metal, no conductive or explosive dust, no severe mechanical vibration.
3. Main features of High Voltage 11KV Capacitor Bank Shunt 334kVar Capacitor
3.1 Casing: Cold-pressed, anti-fouling type casing is adopted.
3.2 Mature internal fuse technology.
- After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
- Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
- The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
3.3 Liquid medium: 100% benzyltoluene (M/DBT) is used. This liquid has excellent low temperature performance and partial discharge performance.
3.4 The main insulation adopts a composite insulation structure, which not only guarantees excellent electrical performance, but also has a certain degree of mechanical strength, which ensures that the insulation of the capacitor complete set of devices is 100% reliable without protection.
4. Applicable standard of High Voltage 11KV Capacitor Bank Shunt 334kVar Capacitor
IEC Standard or equivalent standard
5. Working Conditions of High Voltage 11KV Capacitor Bank Shunt 334kVar Capacitor
- Can be installed indoors and outdoors
- The altitude of the installation site generally does not exceed 2000 meters
- Temperature category: -40/B, pollution level: 1V level
- There is no gas or steam that is severely corrosive to metals.
- No strong mechanical vibration
- No explosive, flammable and dangerous goods