3×220/380V Electric Smart Meter Three Phase Energy Meter (Built-In Carrier)

Basic Information
Place of Origin: Beijing China
Brand Name: Banner
Model Number: DTZY88-Z
Minimum Order Quantity: 1PC
Payment Terms: L/C, T/T
High Light:

380V Three Phase Energy Meter

,

Electric Smart Meter GB17215.321-2008

,

RS485 Electric Smart Meter

DTZY88-Z three-phase multi-function electric energy meter (built-in carrier)
 
I. Overview
DTZY88-Z three-phase multi-function electric energy meter (built-in carrier), using advanced solid-state integrated circuit technology and SMT technology, suitable for measuring AC three-phase active and reactive energy with a frequency of 50 Hz, and its performance complies with GB17215.321-2008 skills requirement. This product has a two-way metering function, which can accurately measure active and reactive energy in both positive and negative directions. It has a time-sharing metering function. The electrical energy is divided into peak, peak, flat, valley and other time periods and total electrical energy. Accumulate and store; can record demand and load curves; LCD display function (with button wake-up LCD display function when power failure), RS485, narrowband carrier communication and infrared communication functions.
3×220/380V Electric Smart Meter Three Phase Energy Meter (Built-In Carrier) 0
 
II. The main parameters
1. Accuracy: Active power 0.5S or level 1, reactive power level 2.
2. Rated voltage (Un): 3×220/380V.
3. Limit working voltage: 0.6Un~1.2Un.
4. Current specifications: 0.3(1.2A), 1(10)A, 1.5(6)A, 5(30)A, 10(60)A, 20(80)A.
5. Basic error, starting and creeping: meet the requirements of GB/T17215.321-2008/GB/T17215.322-2008.
6. Dimensions: 265mm×170mm×75mm.
7. Installation size: 210(226)mm×150mm.
8. Comply with the following relevant specifications:
Q/CSG113007-2011 China Southern Power Grid Corporation three-phase multi-function electric energy meter technical specifications;
Q/CSG113012-2011 China Southern Power Grid Corporation three-phase electronic watt-hour meter appearance structure specification;
Q/CSG113013-2011 China Southern Power Grid Corporation's extended protocol on DL/T645-2007 multi-function electric energy meter communication protocol;
DL/T 645-2007 Multifunctional electric energy meter communication protocol and its filing documents;
DL/T 614-2007 Multifunctional electric energy meter.
three. The main function
1. Support 4 rates, maximum 14 time zones throughout the year, 14 time periods can be set every day, two sets of rate timetable switching, and special timetable settings for holidays.
2. Support the data storage function, which can store the two-way total electric energy and the electric energy data of various tariffs for the last 12 settlement days.
3. Support freezing function, with time freezing, instantaneous freezing, daily freezing, agreed freezing, and whole point freezing.
4. Support event recording function, can record the total number of power failures, the total number of programming, the total number of time calibration, the total number of open meter cover; can permanently record the time of the electricity meter clearing event and the electrical energy data at the time of clearing, etc. .
5. With load recording function, it can be defined from DL/T 645-2007 "voltage, current, frequency", "existing and reactive power", "power factor", "existing and reactive total energy", "four quadrants" Any combination of the six types of data items "total reactive energy" and "current demand".
6. Support alarm function, with light alarm output. The light alarm uses a red constant light indicator, and the alarm automatically ends when the event returns to normal.
7. It has 1 infrared communication interface, 2 RS485 communication interfaces, and narrowband carrier communication interface.
8. Record the cumulative total loss time, the time of the last 10 full loss of voltage, the recovery time, and the voltage, current, power, power factor, positive and negative active power, positive and negative of each phase at the time of occurrence. 8. Information such as reactive power and current.
9. Optional narrowband carrier communication module commonly used in China at present, the carrier module is built-in and cannot be replaced.
10. Support power failure wake-up function.

Contact Details
yufei.zhang

Phone Number : +86-18740359806